View previous topic :: View next topic |
Author |
Message |
Tub Maxson
Joined: 29 Jan 2005 Posts: 42 Location: Cincinnati, OH
|
Posted: Tue Jul 10, 2012 8:07 pm Post subject: Rear Wheel Adaptor |
|
|
I have the HPS built for Larry Miller by the two Bills, several years ago. It is an outstanding rig and continues to delight me everytime I ride it. However, today I had some new rubber installed, same brand/size tires as were taken off. The tire shop that did the tire work could not figure out how to remove the space on the rear, left side, that the wheel is bolted to. The spacer is turned into a volcano shape, held on by these fasteners.
Being the Nut-kill head that I am, I did not know either and did not want to pull the tire to try to figure it out.. I am hoping that Zentime and or others can tell me what type of fastener was used to hold the spacer on this earlier HPS conversion.
Tub _________________ Tub Maxson
Cincinnati, OH
I took the road less traveled.
Now where the Hell am I?
2005 Kawasaki Concours
2004 BMW HPS K1200GT/EZS Chair
'66 BMW R27/Steib LS200
'56 NSU Special Max |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
A JOURNEYMAN
Joined: 27 Jan 2007 Posts: 24 Location: Saint Louis, Missouri
|
Posted: Wed Jul 11, 2012 3:57 pm Post subject: |
|
|
I have a BMW K1200RS with the same wheels. you should have four (4) bolts holding the wheel and five(5) holding the cone shaped spacer to the drive. Once all the bolts are removed the spacer may need a tap with a rubber malet to loosen.
I wil be in Cincinatti July 24-26th, if I can be of any help let me know.
I've put over 40k on this one so far.
Dennis |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
zentime
![](http://members.aol.com/subaguzzi/zen.gif)
Joined: 22 Jan 2005 Posts: 837 Location: Massachusetts USA
|
Posted: Wed Jul 11, 2012 9:07 pm Post subject: |
|
|
What Dennis said.
Tub, sorry for the delay in answering your question. I've been pretty busy getting ready for our trip and didn't see this. Glad Dennis answered your question.
Bill _________________ CBR1100XX/EZS
1973 MotoGuzzi V7sport
will August ever come............ |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
zentime
![](http://members.aol.com/subaguzzi/zen.gif)
Joined: 22 Jan 2005 Posts: 837 Location: Massachusetts USA
|
Posted: Sat Jul 14, 2012 2:41 pm Post subject: |
|
|
Hi Tub, did you see our replies? How did you make out?
bill _________________ CBR1100XX/EZS
1973 MotoGuzzi V7sport
will August ever come............ |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Tub Maxson
Joined: 29 Jan 2005 Posts: 42 Location: Cincinnati, OH
|
Posted: Sat Jul 21, 2012 10:39 pm Post subject: |
|
|
Thanks for the replies. I apologize for not responding earlier, but have been away for some time. I hope to get to it this week. The rig still works well, and there is tread left on the rear wheel, so it has not been a concern. I hope to get back to is this week.
I will let you all know how it goes then.
Tub _________________ Tub Maxson
Cincinnati, OH
I took the road less traveled.
Now where the Hell am I?
2005 Kawasaki Concours
2004 BMW HPS K1200GT/EZS Chair
'66 BMW R27/Steib LS200
'56 NSU Special Max |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Tub Maxson
Joined: 29 Jan 2005 Posts: 42 Location: Cincinnati, OH
|
Posted: Sun Aug 19, 2012 7:36 pm Post subject: Rear Wheel Adaptor |
|
|
Finally got around to looking at it again. Got the wheel off and the new tire on, and back together. Thanks for all the assistance.
Tub _________________ Tub Maxson
Cincinnati, OH
I took the road less traveled.
Now where the Hell am I?
2005 Kawasaki Concours
2004 BMW HPS K1200GT/EZS Chair
'66 BMW R27/Steib LS200
'56 NSU Special Max |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|