| View previous topic :: View next topic |
| Author |
Message |
Gazza
Joined: 29 Jun 2010
Posts: 78
Location: Durham,England
|
 Posted: Thu Jun 23, 2011 11:19 am Post subject: budget swing arm for car wheel |
 |
|
hi, i've been thinking on how to fit a car wheel into rear of vmax and keep coming back to a single sided design, so i've made a jig around my 2 inch over stock swing arm,i'm going to cut up a standard arm (easy to replace)lengthen 2 inches and have deep over and under braces, i know this is not high performance stuff but hope there is some interest in this for others
standard arm in jig
the round bar in spindle position is 25.7 in dia, which is strangly the same as vmax spindle end and car hub internal dia, spookily
 |
|
| Back to top |
|
 |
Gazza
Joined: 29 Jun 2010
Posts: 78
Location: Durham,England
|
| Posted: Tue Jun 28, 2011 5:39 pm Post subject: |
|
|
standard arm now extended to 2 inch over stock
 |
|
| Back to top |
|
|
Gazza
Joined: 29 Jun 2010
Posts: 78
Location: Durham,England
|
| Posted: Wed Mar 28, 2012 9:10 pm Post subject: |
|
|
| i've reverted back to solo bikes, vmax and saluki been seperated, this will not be completed i dont think, i'll keep popping in on here, latest project is a bike with CHS |
|
| Back to top |
|
|
zentime
Joined: 22 Jan 2005
Posts: 837
Location: Massachusetts USA
|
| Posted: Thu Mar 29, 2012 1:06 am Post subject: |
|
|
keep us updated 
_________________
CBR1100XX/EZS
1973 MotoGuzzi V7sport
will August ever come............ |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
