View previous topic :: View next topic |
Author |
Message |
legalr
Joined: 30 Jan 2005 Posts: 163 Location: Wallingford, Vermont
|
Posted: Mon Feb 28, 2005 3:54 pm Post subject: Longer Handlebars |
|
|
Early this winter I changed the handlebars on my bike from short clip-on bars to longer ones so that I could increase the lever for easier steering. My project took several weeks to assemble all the component parts so I haven't had a chance to test them out on the road yet as winter set in before I completed the change. My original bars from tip to tip were 27.5 inches. My new ones are 32.5 inches. Riding is still several weeks away for me.
Has anyone else tried longer handlebars for lighter steering effort?
http://www.msnusers.com/MotorcyclesSidecars/shoebox.msnw
http://www.msnusers.com/MotorcyclesSidecars/shoebox.msnw?action=ShowPhoto&PhotoID=7 _________________ Larry Miller
Wallingford, Vermont
BMW K1200RS/EZS RX-5
BMW R1150R/EZS Summit
2004 BMW K1200GT |
|
Back to top |
|
|
patric
Joined: 01 Feb 2005 Posts: 5 Location: Birch Run , Michigan
|
Posted: Mon Feb 28, 2005 5:07 pm Post subject: |
|
|
Hi Larry , I changed the bars on my old rig ( 1986 BMW K100/ EML GT2 ) from K100RS bars to R1100GS bars /with setbacks .
I didn't do it for the leverage , but so I could get to a more upright position . I had my back operated on , and needed to get more upright .
It did make for a lot more leverage , but it took some time to get use to it . I would turn way more that I wanted too (over steer ) . I had a hard time making small steering inputs , I was smoother with the short bars , but after a time I got so it wasn't so jerky with the GS bars . .
I've put 300,000 miles on BMW motorcycles . From the Atlantic to the Pacific , The Golf of Mexico to Alaska . Everybody say's motorcycles are dangerous . I got hit by a truck while walking . Motorcycles are safe , it's that walking you have to watch out for .
Hope this helps ...Patric ... _________________ Patric Blackman
2002 BMW K1200LT / Hannigan 2+2
1995 BMW R1100GS
1987 Helix |
|
Back to top |
|
|
legalr
Joined: 30 Jan 2005 Posts: 163 Location: Wallingford, Vermont
|
Posted: Mon Feb 28, 2005 5:16 pm Post subject: Longer Handlebars |
|
|
Quote: | It did make for a lot more leverage , but it took some time to get use to it . I would turn way more that I wanted too (over steer ) . I had a hard time making small steering inputs , I was smoother with the short bars , but after a time I got so it wasn't so jerky with the GS bars . . |
Thanks, Pat, for your reply. I like the more leverage part but I can see where you are coming from though I'm anxious to be able to see how my new bars will affect the steering dynamics of my K1200RS/RX-5. Of course, I could always change back, but I feel confident that I'll like the change and adapt rather quickly to it too. Guess I'm the eternal optimist. _________________ Larry Miller
Wallingford, Vermont
BMW K1200RS/EZS RX-5
BMW R1150R/EZS Summit
2004 BMW K1200GT |
|
Back to top |
|
|
docmike
Joined: 27 Jan 2005 Posts: 630 Location: Eastern NC
|
Posted: Mon Feb 28, 2005 6:15 pm Post subject: |
|
|
Larry,
I put a set off Helibars on the K11RS / EML a few years ago, mainly to get a more upright seating position. They are several inches wider than stock. It felt like power steering. Not to mention cut down the Motrin requirements on long rides. _________________ Mike Currin
93 BMW K1100RS / EML Speed 2000
89 Honda GB 500 (6,700 miles, all original except tires)
67 Triumph 650 chopper
92 Suzuki GS500 (eldest son) |
|
Back to top |
|
|
legalr
Joined: 30 Jan 2005 Posts: 163 Location: Wallingford, Vermont
|
Posted: Mon Feb 28, 2005 6:30 pm Post subject: Longer Handlebars |
|
|
Quote: | I put a set off Helibars on the K11RS / EML a few years ago, mainly to get a more upright seating position. They are several inches wider than stock. It felt like power steering. Not to mention cut down the Motrin requirements on long rides. |
Mike,
It's sounding better all the time. Makes me wonder why I didn't think about longer bars sooner? _________________ Larry Miller
Wallingford, Vermont
BMW K1200RS/EZS RX-5
BMW R1150R/EZS Summit
2004 BMW K1200GT |
|
Back to top |
|
|
swaybar2002
Joined: 26 Jan 2005 Posts: 380 Location: Central Pa.
|
Posted: Mon Feb 28, 2005 10:26 pm Post subject: |
|
|
Well being the backwards person that I am I had went to longer bars on all the rigs we have ever had except for the present one where I actually have gone to shorter bars.
Longer bars certainly did make the steering effort less. Yep, it is true that you turn the bars futher but it is not hard to get used to.
Claude |
|
Back to top |
|
|
legalr
Joined: 30 Jan 2005 Posts: 163 Location: Wallingford, Vermont
|
Posted: Mon Feb 28, 2005 10:43 pm Post subject: Longer Handlebars |
|
|
Quote: | went to longer bars on all the rigs we have ever had except for the present one where I actually have gone to shorter bars. |
I'm curious, Claude, why you opted for shorter bars on your present rig? Was it for clearance between the bike and the sidecar? Or something else?
_________________ Larry Miller
Wallingford, Vermont
BMW K1200RS/EZS RX-5
BMW R1150R/EZS Summit
2004 BMW K1200GT |
|
Back to top |
|
|
swaybar2002
Joined: 26 Jan 2005 Posts: 380 Location: Central Pa.
|
Posted: Tue Mar 01, 2005 12:35 am Post subject: Re: Longer Handlebars |
|
|
legalr wrote: | Quote: | went to longer bars on all the rigs we have ever had except for the present one where I actually have gone to shorter bars. |
I'm curious, Claude, why you opted for shorter bars on your present rig? Was it for clearance between the bike and the sidecar? Or something else?
|
Believe it or not the doctor told me that the leaning forward position would be better on my back. I had a crash a couple of years ago on a solo bike and broke my elbow, had a bone sticking out of my wrist, broke some ribs and two vertebre (other than that it was no big deal..lol). Anyhow...Leaning forward would take the jolting off of the back better than sitting upright he said....so I tried it and it sure seemed to work.
The bars on the rig are not real real narrow bu tcompared to the motocross and flat track bars I used to run on a sidecar outfit they are quite different. Thye are aftermarket bars for a sportbike..don't know the actual width.
Claude |
|
Back to top |
|
|
Ralph
Joined: 27 Jan 2005 Posts: 603 Location: Lexington, Ky
|
Posted: Tue Mar 01, 2005 1:25 am Post subject: |
|
|
hehehe Claude we ran flatrack bars on our sidecars to. _________________ "So Soon Old & So Late Smart" |
|
Back to top |
|
|
legalr
Joined: 30 Jan 2005 Posts: 163 Location: Wallingford, Vermont
|
Posted: Tue Mar 01, 2005 1:46 am Post subject: Longer Handlebars |
|
|
Claude says:
Quote: | Believe it or not the doctor told me that the leaning forward position would be better on my back. |
When we get to Maggie Valley you can try my rig and see how my new bars feel for comparison purposes. _________________ Larry Miller
Wallingford, Vermont
BMW K1200RS/EZS RX-5
BMW R1150R/EZS Summit
2004 BMW K1200GT |
|
Back to top |
|
|
swaybar2002
Joined: 26 Jan 2005 Posts: 380 Location: Central Pa.
|
Posted: Tue Mar 01, 2005 2:23 am Post subject: Re: Longer Handlebars |
|
|
legalr wrote: | Claude says:
Quote: | Believe it or not the doctor told me that the leaning forward position would be better on my back. |
When we get to Maggie Valley you can try my rig and see how my new bars feel for comparison purposes. |
Okay, will do...we're still on for Country Cupboard though right?
Claude |
|
Back to top |
|
|
legalr
Joined: 30 Jan 2005 Posts: 163 Location: Wallingford, Vermont
|
Posted: Tue Mar 01, 2005 12:11 pm Post subject: Longer Handlebars |
|
|
Quote: | Okay, will do...we're still on for Country Cupboard though right? |
Yes, we are. I've got my reservations all made. And after I read the post I realized how it read but you don't have to wait till we reach Maggie Valley, you can try my rig when we meet at the Country Cupboard or on the way down the BRP. _________________ Larry Miller
Wallingford, Vermont
BMW K1200RS/EZS RX-5
BMW R1150R/EZS Summit
2004 BMW K1200GT |
|
Back to top |
|
|
swaybar2002
Joined: 26 Jan 2005 Posts: 380 Location: Central Pa.
|
Posted: Tue Mar 01, 2005 12:16 pm Post subject: Re: Longer Handlebars |
|
|
legalr wrote: | Quote: | Okay, will do...we're still on for Country Cupboard though right? |
Yes, we are. I've got my reservations all made. And after I read the post I realized how it read but you don't have to wait till we reach Maggie Valley, you can try my rig when we meet at the Country Cupboard or on the way down the BRP. |
Sounds good Larry. We can switch machines for a while. Let me get this thing done and , hopefully, roadworthy first...LOL _________________ Claude Stanley
Founder: Internet Sidecar Owners Klub
http://autos.groups.yahoo.com/group/SCT/
2007
I.S.O.K Sidecar RON-DEE-VOO III ..
First full weekend in August!! Thursday through Sunday!!
Weikert, Pa ..more details coming |
|
Back to top |
|
|
legalr
Joined: 30 Jan 2005 Posts: 163 Location: Wallingford, Vermont
|
Posted: Tue Mar 01, 2005 7:39 pm Post subject: |
|
|
Claude wrote Quote: | Sounds good Larry. We can switch machines for a while. Let me get this thing done and , hopefully, roadworthy first...LOL |
What do you have to do before you consider it "done"? _________________ Larry Miller
Wallingford, Vermont
BMW K1200RS/EZS RX-5
BMW R1150R/EZS Summit
2004 BMW K1200GT |
|
Back to top |
|
|
swaybar2002
Joined: 26 Jan 2005 Posts: 380 Location: Central Pa.
|
Posted: Tue Mar 01, 2005 11:19 pm Post subject: |
|
|
Done? It'll never be done ...but to get it roadworthy quite a bit yet. Pretty sure we'll have it done in time to play with it here , work some bugs out and make it to Maggie Valley. _________________ Claude Stanley
Founder: Internet Sidecar Owners Klub
http://autos.groups.yahoo.com/group/SCT/
2007
I.S.O.K Sidecar RON-DEE-VOO III ..
First full weekend in August!! Thursday through Sunday!!
Weikert, Pa ..more details coming |
|
Back to top |
|
|
|