View previous topic :: View next topic |
Author |
Message |
moses
Joined: 01 May 2005 Posts: 32 Location: uk
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
zentime
![](http://members.aol.com/subaguzzi/zen.gif)
Joined: 22 Jan 2005 Posts: 837 Location: Massachusetts USA
|
Posted: Mon Nov 09, 2009 4:29 pm Post subject: |
|
|
Hi Anthony, I took the liberty of inserting the pictures for you. I went to the pictures and right clicked on them and selected copy image location and pasted them into your post. Highlight the complete location then select Img from the menu above where you compose your post. That's all there is to it. Pictures need to be on a sever that can be linked to. You can't upload pictures directly to the forum.
You can use the edit feature of your post to see how I did it.
Nice looking job on bending the tubes! It would be cool to see how the arms will attach to the bike. Are you trying to decide on which calipers to use? Nice looking ball joints too. Keep up the good work! _________________ CBR1100XX/EZS
1973 MotoGuzzi V7sport
will August ever come............ |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
moses
Joined: 01 May 2005 Posts: 32 Location: uk
|
Posted: Mon Nov 09, 2009 11:54 pm Post subject: thanks zentime |
|
|
hi all
im using two 6 pots on the front with a vented disc, the 4 pots are possibly for the back wheel but i might be rethinking back wheel to go with a normal disc and one 4 pot stuck on it mounted on the outside as my original plan might be a fabrication nightmare?
the tubes are all welded up today now and im making the balljoint hangers and threaded inserts for rose joints this week? hopefully the next few weeks will deal with the front end and i can get to work on the cradle.
ill try putting some piccies on the weekend if i manage to skive off from domestic stuff.
anthony |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
moses
Joined: 01 May 2005 Posts: 32 Location: uk
|
Posted: Tue Nov 10, 2009 12:10 am Post subject: yippeeeeee i can put piccies on |
|
|
thanks again zentime itll make my post more coherent |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
bmcsheehy
Joined: 22 Jan 2005 Posts: 991 Location: Massachusetts USA
|
Posted: Wed Nov 11, 2009 1:12 pm Post subject: |
|
|
Hi Moses,
Looking good.
What type of vented disk are you going to use on the front?
Did you build spacers to make the calipers wider to accommodate the thicker disk?
![Thinking](images/smiles/Thinking.gif) _________________ Bill
High Performance Sidecaring... ...There is nothing "HACKED" about it.
2006 ZX-14 / HANNIGAN HP.
2011 Concourse / California Friendship III.
2016 Suzuki Bandit 1250s
1936 Ford Fordoor Humpback
www.Yankee-Engineering.com |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
moses
Joined: 01 May 2005 Posts: 32 Location: uk
|
Posted: Wed Nov 11, 2009 11:47 pm Post subject: hi bmcsheehy |
|
|
hi all
iv just built the spacers for the 6 pots and had to space them out by 19mm wider 3/4" in imperial, i'v used ford escort xr3i vented disc which goes with the wheels iv used.
luckily the triumph 2 pot calipers as fitted to early triumphs fitted onto the normal disc on the sidecar wheel without spacing but i had to skim them down by 1mm.
best regards
anthony |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
moses
Joined: 01 May 2005 Posts: 32 Location: uk
|
Posted: Tue Nov 17, 2009 8:13 pm Post subject: front disc |
|
|
hi all
started machining front disc today from a standard ford disc with an aluminium inner mount to go on chs front shaft, ill put the holes in it saturday and machine shaft.
anthony |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
sidecarkeith
![](http://i98.photobucket.com/albums/l274/sidecaranne/Leaving_Hollingsworth4.jpg)
Joined: 06 Jan 2007 Posts: 336 Location: yorkshire uk
|
Posted: Wed Nov 18, 2009 8:11 am Post subject: |
|
|
Interesting.
Are you going to use the inner as well ?
Keith |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
bmcsheehy
Joined: 22 Jan 2005 Posts: 991 Location: Massachusetts USA
|
Posted: Wed Nov 18, 2009 1:51 pm Post subject: |
|
|
Thats a good idea, I assume that the aluminum piece will get bolted to the modified rotor. _________________ Bill
High Performance Sidecaring... ...There is nothing "HACKED" about it.
2006 ZX-14 / HANNIGAN HP.
2011 Concourse / California Friendship III.
2016 Suzuki Bandit 1250s
1936 Ford Fordoor Humpback
www.Yankee-Engineering.com |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
docmike
Joined: 27 Jan 2005 Posts: 630 Location: Eastern NC
|
Posted: Wed Nov 18, 2009 2:14 pm Post subject: |
|
|
The rotor could be made "full floating" _________________ Mike Currin
93 BMW K1100RS / EML Speed 2000
89 Honda GB 500 (6,700 miles, all original except tires)
67 Triumph 650 chopper
92 Suzuki GS500 (eldest son) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
moses
Joined: 01 May 2005 Posts: 32 Location: uk
|
Posted: Thu Nov 19, 2009 7:41 pm Post subject: thanks docmike |
|
|
thanks docmike ill post results after weekend |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
moses
Joined: 01 May 2005 Posts: 32 Location: uk
|
Posted: Sun Nov 29, 2009 12:21 am Post subject: bit more today |
|
|
hi al
heres the fruits of my labour today i photographed as i built this time so others may gain more benefit from my bodging! the pictures show chs without bearings and without outer fitted which i plan to do later this week when some nice big tube arrives to bend steering arm.
best regards
anthony |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|